Welcome To ATEK Communications- Leading The Industry With Fiber Cable Testing- Fiber Termination- Fiber Splicing Services From Coast To Coast- From The Data Center To The Desktop

Fiber Cable Installation- Fiber Cable Splicing- Fiber Cable Termination-Fiber Cable Repair- Fusion Splicing-Fiber Cable Testing- Fiber Cable Trenching- Aerial Fiber Cable Installation- DAS Fiber Networks

ATEK-Your 21st Century Data Contractor -We Now Service All of the 48 States Call Us For More Information at (888) 909 ATEK

 

ATEK-Your 21st Century Data Contractor Offering National Data-IT -Fiber Services at a Local Price (888) 909-ATEK-Call Us at (888) 909- 2835 For Local Residential- Commercial- Carrier-Municipal or Government Cabling- LAN-WAN- National Roll Outs- Contractor-Network Integration- Cabling Contractors

Divisions

DAS- Distributed Antenna Systems

Florida Fiber Optic Cable Installation- California Fiber Cable Installation- Florida Fiber Cable Installations-Fiber Optic Cable Installation-Fiber Optic Installers- Fiber Optic Cable Installer- Fiber Switch Installer- System Integrator- Fiber Optic Switch Installation

ATEK Communications is a national fiber installtion and data contractor based in several states including Florida, California and New York, Virginia and Texas and as a network systems integrator specializing in fiber optic cable installion, fiber cable termination, fiber splicng, fiber termination and fiber cable repair with offices in California, Nevada and Florida & part of a nationwide team of fiber optic cable installers & network integration & system integration personnel that are able to be mobilized anytime and anywhere in the U.S. and abroad. ATEK Communications now offers fusion splicing , fiber terminations, and now fiber charaterization services to certify your exiting and new cable plant.

As a network systems integrator specializing in fiber optic cable installation, we canprovide a team of fiber optic cable installers & network integration & system integration professionals that can be mobilized anytime in the USA. We can offer same day service in certain areas along with guaranteed fiber termination, fiber fusion splicing, pulling, design , engineeering and now fiber characterization services with ample advance notice.

ATEK can provide fiber optic cabling services at competitive rates- we will work with you to offer your company competitive rates without compromising on quality. We offer end to end fiber optic design /build services for Outside Plant (OSP) to central office, commercial fiber optic cable installations services for the following:

ATEK specializes in all areas of both OSP fiber optic cable and underground fiber cable. ATEK Communications also offers the ability to tie in the fiber optic cable installations to the Network Integration side of your cable plant through the use of fiber optic patch panels, fiber optic transceivers or fiber optic multiplexes that migrate the fiber optic light signals into recognizable data streams for copper based switches. Fayette Technologies can take any signal from a T1 to OC-12 from the central office to the desktop. Fayette Technologies offers you design- build services at comparable rates. Our network integration specialists are supported by experienced teams of project administrators, project managers, and experienced technicians who are ready to handle any network installation project, large or small. Our fiber optic certifications, experience in fiber optics installation, technologies and standards are key factors in our success in fiber network solutions.ATEK Communications Technologies can deliver the best solution your application needs, now and in the future.

For our Florida Fiber Optic Installation Services:

ATEK can provide fiber optic cabling services for all 50 states at competitive rates- we will work with you and your staff to offer you and your company the most competitive rates in the marketplace without compromising on Bellcore quality services.

We offer end to end fiber optic design build services for OSP (outside plant) to central office and commercial fiber optic cable installations services for multimode fiberoptic cable, singlemode finer optic cable, aerial fiber optic cable and underground loose tube fiber optic cable.

ATEK specializes in all areas as a fiber optic cable installion of both OSP fiber optic cable or underground fiber cable- to backbone structured cable fiber optic cable installations. ATEK also offers the ability to tie in the fiber optic cable installations to the Network Integration side of your cable plant through the use of fiber optic patch panels, fiber optic tranceivers or fiber optic multiplexers that migrate the fiber optic light signals into recognizable data streams for copper based switches. ATEK can take any signal from a T1 to OC-12 from the central office to the desktop. We can offer you design or design- build services at affordable rates. Our network integration specialists are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any nework installation project.

AT ATEK we ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

Our fiber optic certifications, extensive experience on fiber optics installation, and knowledge of fiber optic technologies and standards are key factors in our successful delivery of fiber network solutions. leading fiber optic suppliers. Together we can deliver the solution that best meets your application needs, now and long term.

  • Design and Installation of Fiber Optic Cabling
  • Fiber Optic Termination
  • Light Interconnection Units and Fiber Shelves
  • Testing and Certifications
  • Fiber Tray and Raceway
  • Fiber Innerduct
  • Wall-mount and Freestanding Cabinets and Racks
  • Fiber Optic Fusion and Mechanical Splicing

Our certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI).

On & Offsite Service

ATEK Communications service comes with a guarantee of quality and a commitment to support. Because we feel so strongly about professionally serving our clients, we offer on and offsite services designed to meet your needs:

Onsite-Project Management-IT Services-Installations

  • ATEK has Available- 24-hour, 7-days a week dispatching by field-trained support staff
  • ATEK Professional and helpful technicians who arrive on time and in uniform
  • ATEK Provides Customized software available that allows you to monitor and document progress in real-time and at your convenience
  • ATEK will provide Short- or long-term onsite IT Sevices and project management-that frees up your staff

Offsite-Project Management-IT Services-Installations

  • ATEK has available 24-hour, 7-days a week dispatching by field-trained support staff
  • ATEK's Help Desk services available- 24/7 services available
  • ATEK's Level I support for immediate solutions on a remote basis
  • ATEK's Level II support includes remote solutions and dispatched technicians
  • ATEK'sLevel III support with a technician dispatched to your location
  • ATEK's Level IV support with supervisory-management responsibilites

We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

Tampa Bay Cabling & Network Installation Services

California Offices Northern CA (925) 944-0777

California Offices Southern CA (619) 573-4164

Tampa Bay -St. Pete, Florida Offices (866) 650-DATA or (727) 547-2200

ATEK Communications has BICSI certified installers fully versed in fiber optic distribution designs and installations for a wide range of fiber optic network applications. We can help you integrate data and telecommunication networks over fiber effectively .

Our certified RCDD, Certified Network Specialist and BICSI Technicians work as team to bring the latest fiber optic technologies to our customers. We provide design, installation , and certifications of fiber optic cabling systems in central offices, POP sites, commercial, and residential sites.

ATEK Communications, a system integrator with offices in California and Florida are part of a nationwide team of network integration and system integration personnel that can be mobilized anytime, anywhere in the US. ATEK specializes in all areas of Network Integration from the central office to the desktop. We can offer you design or design- build services at affordable rates. Our network integration specialists are backed by seasoned teams of administrators, project managers, and technicians who are equipped to handle virtually any nework installation project. We can provide your company with complete OSI level 1-7 services including structured cabling services to DSL, wireless, VOIP , and installation of firewalls.Our established relationships with leading vendors also assure the best possible service and quality equipment is provided to our customers.All CAT 5e and CAT 6 & fiber optic cabling system designs are reviewed by our project managers and quality control engineers and installations quality checked by a Registered Communications Distribution Designer (RCDD).

Our certified RCDDs and LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications.

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI).

-- --

We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

Our fiber optic certifications, extensive experience on fiber optics installation, and knowledge of fiber optic technologies and standards are key factors in our successful delivery of fiber network solutions. leading fiber optic suppliers. Together we can deliver the solution that best meets your application needs, now and long term.

Our Services Include:

Our certified RCDDs a nd LAN/WAN Specialists work closely with contractors and end users to deliver the latest cabling technologies that best suit the needed applications

All fiber optic cabling system designs are reviewed and installations quality checked by a Registered Communications Distribution Designer (RCDD). This is a professional designation of the Building Industry Consulting Services International (BICSI).

We ensure that the fiber optic cabling system design, components, and workmanship comply with the standards and practices of BICSI. These standards and practices are elaborated in the Telecommunications Distribution Methods Manual, the EIA/TIA Telecommunications Building Wiring Standard, The National Fire Protection Assn., and the National Electrical Code (NFPA-70).

WARRANTY

Our fiber optic cabling installations are supported by extended warranties that guarantees both end to end performance and application assurance for you. Our technicians are certified on every product installation that we design and are well trained on the industry structured cabling standard.

The specific standards of the EIA/TIA Building Telecommunications Wiring Standards are:

Fiber Optic Testing Equipment

ATEK also offers fiber opic testing. ATEK can assist your organization whether you need central office testing or outside plant singlemode splicing. For example, there are two methods to measure test loss, single-ended loss and double-ended loss. Single-ended loss works by using only the launch cable while the double-ended loss works by using a received cable attached to the meter also. All are technicians are certified by the manufacturers we represent to perform the tests.

 

 

 

BRIEF OVER VIEW OF FIBER OPTIC CABLE ADVANTAGES OVER COPPER:

• SPEED: Fiber optic networks operate at high speeds - up into the gigabits
• BANDWIDTH: large carrying capacity
• DISTANCE: Signals can be transmitted further without needing to be "refreshed" or strengthened.
• RESISTANCE: Greater resistance to electromagnetic noise such as radios, motors or other nearby cables.
• MAINTENANCE: Fiber optic cables costs much less to maintain.


In recent years it has become apparent that fiber-optics are steadily replacing copper wire as an appropriate means of communication signal transmission. They span the long distances between local phone systems as well as providing the backbone for many network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies.

A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the system works in conjunction with wire based systems.

At one end of the system is a transmitter. This is the place of origin for information coming on to fiber-optic lines. The transmitter accepts coded electronic pulse information coming from copper wire. It then processes and translates that information into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser diode (ILD) can be used for generating the light pulses. Using a lens, the light pulses are funneled into the fiber-optic medium where they transmit themselves down the line.

Think of a fiber cable in terms of very long cardboard roll (from the inside roll of paper towel) that is coated with a mirror.
If you shine a flashlight in one you can see light at the far end - even if bent the roll around a corner.

Light pulses move easily down the fiber-optic line because of a principle known as total internal reflection. "This principle of total internal reflection states that when the angle of incidence exceeds a critical value, light cannot get out of the glass; instead, the light bounces back in. When this principle is applied to the construction of the fiber-optic strand, it is possible to transmit information down fiber lines in the form of light pulses.Fiber optic cable functions as a "light guide," guiding the light introduced at one end of the cable through to the other end. The light source can either be a light-emitting diode (LED)) or a laser.

The light source is pulsed on and off, and a light-sensitive receiver on the other end of the cable converts the pulses back into the digital ones and zeros of the original signal.

Even laser light shining through a fiber optic cable is subject to loss of strength, primarily through dispersion and scattering of the light, within the cable itself. The faster the laser fluctuates, the greater the risk of dispersion. Light strengtheners, called repeaters, may be necessary to refresh the signal in certain applications.

While fiber optic cable itself has become cheaper over time - a equivalent length of copper cable cost less per foot but not in capacity. Fiber optic cable connectors and the equipment needed to install them are still more expensive than their copper counterparts.

The use of fiber-optics was generally not available until 1970 when Corning Glass Works was able to produce a fiber with a loss of 20 dB/km. It was recognized that optical fiber would be feasible for telecommunication transmission only if glass could be developed so pure that attenuation would be 20dB/km or less. That is, 1% of the light would remain after traveling 1 km. Today's optical fiber attenuation ranges from 0.5dB/km to 1000dB/km depending on the optical fiber used. Attenuation limits are based on intended application.

The applications of optical fiber communications have increased at a rapid rate, since the first commercial installation of a fiber-optic system in 1977. Telephone companies began early on, replacing their old copper wire systems with optical fiber lines. Today's telephone companies use optical fiber throughout their system as the backbone architecture and as the long-distance connection between city phone systems.

Cable television companies have also began integrating fiber-optics into their cable systems. The trunk lines that connect central offices have generally been replaced with optical fiber. Some providers have begun experimenting with fiber to the curb using a fiber/coaxial hybrid. Such a hybrid allows for the integration of fiber and coaxial at a neighborhood location. This location, called a node, would provide the optical receiver that converts the light impulses back to electronic signals. The signals could then be fed to individual homes via coaxial cable.

Local Area Networks (LAN) is a collective group of computers, or computer systems, connected to each other allowing for shared program software or data bases. Colleges, universities, office buildings, and industrial plants, just to name a few, all make use of optical fiber within their LAN systems.

Power companies are an emerging group that have begun to utilize fiber-optics in their communication systems. Most power utilities already have fiber-optic communication systems in use for monitoring their power grid systems.

Single Mode cable is a single stand of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. Single Mode Fiber with a relatively narrow diameter, through which only one mode will propagate typically 1310 or 1550nm. Carries higher bandwidth than multimode fiber, but requires a light source with a narrow spectral width. Synonyms mono-mode optical fiber, single-mode fiber, single-mode optical waveguide, uni-mode fiber.

Single-mode fiber gives you a higher transmission rate and up to 50 times more distance than multimode, but it also costs more. Single-mode fiber has a much smaller core than multimode. The small core and single light-wave virtually eliminate any distortion that could result from overlapping light pulses, providing the least signal attenuation and the highest transmission speeds of any fiber cable type.

Single-mode optical fiber is an optical fiber in which only the lowest order bound mode can propagate at the wavelength of interest typically 1300 to 1320nm.

Multimode cable is made of of glass fibers, with a common diameters in the 50-to-100 micron range for the light carry component (the most common size is 62.5). POF is a newer plastic-based cable which promises performance similar to glass cable on very short runs, but at a lower cost.

Multimode fiber gives you high bandwidth at high speeds over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. Typical multimode fiber core diameters are 50, 62.5, and 100 micrometers. However, in long cable runs (greater than 3000 feet [914.4 ml), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission.

 ATEK Communications, an established performance based national data contractor and national data integrator is one of the most experienced design-build structured cabling contractors in the USA, from California to Florida to New York and Virginia you can be sure you be be provided the most experienced fiber cable installations, fiber testing, data cabling, IT support, OSP- Outside plant, Security, VOIP phone and phone system providers and data cabling contractors in the United States offering a multitude of data  communications services from design-build structured cabling infrastructure, LAN- WAN integration, long haul fiber optic cable installation to IT support and service (SMB) ATEK Communications has offices throughout the US offers competitive regional and local data cabling rates allows us to tailor cabling and installation rates to meet your needs. ATEK has fiber optic crews specializing in fiber optic installations. Our fiber technicians are trained in intricate fiber cable installations, fiber cable terminations , fiber cable fusion splicing services and FTTH- design -build services. We have on staff BICSI trained and certified RCDD's should you need one for certifications. We have very competitive rates for our fiber optic installers. ATEK Communications has several manufacturer data contractor certifications to offer you and your company "end to end" solutions for several manufacturers.ATEK provides design- build, installation, project management and certifications of fiber cable,copper, coax, wireless, along with installations of optical or point to point laser communications (space optics). We provide structured cabling and fiber optic cabling systems in all 48 lower states for central offices, government, POP sites, commercial, and residential sites. We also offer builders and developers a system to build ongoing revenue by installing FTTH design- Engineering and "Smart Home" cabling into all new homes insuring the homeowner that his new home investment is technologically secure and will not become obsolete for a minimum of 25 years. The Smart Home certified cables we install are made of CAT 5e or CAT 6, coax Cable, and multimode fiber optic cable. All installations are covered by a five year warranty minimum for product or cable failure and qualifying systems are covered for up to 25 years. Cable certification testing is performed using state-of-the-art test equipment. Call for details at (888) 909-ATEK FAQ's

ATEK Communications has recently teamed up with one of our national partners to roll out a 750 nursing home DAS wireless network. The fiber backbone was installed then ethernet sent to the nursing stations using media converters to CAT6 cable and to WAP's throughout the facilities. Please call (888) 909-ATEK for more information

Whether you require CAT 5e-CAT6 Cabling -Fiber Cabling-FIber Testing- Fusion Splicing - Emergency Restoration-Coax -Broadband cable for Tower Cell cabling to DAS Wireless to OSP- Outside Plant-Trenching and Directional Boring- We have technicians located throughout the USA that can do the project on time and on budget. We also have IT Cisco CCNA, RCDD's and phone system engineers on staff to help you.

We have local crews and can offer competitive rates to meets your financial needs. We will do our best to meet or beat all local rates offered by reputable companies.

Distributed Antenna Systems-Das Installation-Das Installers

We Now Service All of the 50 States- Call Us For More InformationFAQ's

Outside Plant Cable Testing And Cable Certificafication- More Info

Fiber Characterization FiberCertifications For New & Existing Cable Plant-More Info

Fiber Cable Testing and Certification For Commercial,Data Centers and Carriers-More Info

Das Wireless Services- More Info

Strucured Cabling Services- More Info

National Telecommunications Roll Out Services- More Info

National Roll-Outs-Last Minute Remote Office Situations:

An example: You get an call or text or email from your Corporate Offices late Friday afternoon. The email asks if you have ordered a 5 data & telephone lines, and a VOIP line for the New Executive Vice President, who will be starting on the following week. This is all news to you....And you have no idea what to do or who to call! This is where ATEK comes in. ATEK can manage this entire process for you-promptly, efficiently and in a cost effective manner. In this situation-this is what ATEK Communications will provide you:

Taking another example and apply it to a 500 Store Retail Chain that needs a T-1,Telephone, IT or Voicemail System installed-or a temporary Corporate Office Location with 300 Branches that need new T-1 Data Circuits-installed. Let us take care of your communication needs as ATEK can provide you with multiple customers in several areas all at the same time. Or are you a multi-site regional, national or international retailer looking for justification for your upcoming technology upgrade? Learn how to make the most of your conversion from dial access to DSL, frame relay or VSAT for each of your stores. Here are the financial blueprints you can take to the CFO. Excerpt: There are a variety of reasons that a retailer may want to convert from dial-up. Some include a reduction in long distance charges, improvement in reliability, a decrease in credit card authorization time and elimination of expensive local telephone lines in each store. Or putting in a real time VPZN- virtual private network whereby each of your stores have real time access to current data. Or putting in a VOIP phone system solution to drastically cut your long distance phone charges.Cost justification is a matter of systematically evaluating the overall business and identifying elements of that operation that can be improved through the conversion.

ATEK Communications now offers wireless installation services and engineering for all the USA's 4G wireless networks. Please visit our new wireless page for 4G national rollouts. NEW NATIONAL 4 G WIRELESS ROLLOUT SERVICES. ATEK can provide a complete portfolio of wireless network services for municipalities, hospitals, resorts, campus environments and small business. If you require local fiber testing or repair, regional or national fiber cable installation services including fiber cable design, fiber cable installations, fiber cable repair, fiber cable testing and fiber cable certifications please call us for your competitive rates. We offer national fiber services at local competitive rates. With our 30,000 national partner we can handle any fiber, data or phone system project anywhere in the USA at competitive rates. FAQ's

ATEK is also an  IT managed services provider, network integrator and interconnect company that provides structured data cabling contractor  installations, fiber optic cable installations, smart home installations, cable testing, telephone systems and Cisco CCIE network  installations and services. Since 2000, ATEK has WIFI, and wireless back haul solutions for the commercial and municipality market. Call us today at (888) 909- ATEK for information how we can transform your workspace or community to a revenue producing and technology "friendly" environment. We have certified RCDD designers, Certified Network Specialists, and BICSI Technicians on staff to work as team to bring the  latest structured cabling standards (EIA/TIA 568A/A) and fiber optic cabling technologies to our customers. We also are a  licensed contractor in California with a C-10 electrical contractor's license which can also offer C-10 Electrical work in both  commercial and residential projects. Whether you are a design-build for a new data center, a new LAN/WAN network for a  college campus or a real estate developer looking for the latest in Smart Home Technology to offer their new homeowners the  latest in telecommunications services, you can be assured that ATEK Communications can handle all the details on time and on  budget. ATEK now has a FTTH (FTTH)design- build division to assist developers, cities and counties to achieve Triple -Play  FTTH payback for their fiber deployment in as little as 3 years.

ATEK has now opened a new National IT Integration task force to address the latest issues and newest technologies addressing network security, managed services, virtualization, SANS, IT security. SIP Trucking, T-1's, MPLS and more. Please call us for more details at (866) 650-3282.

National Rollouts-National Franchise Rollouts-National Chains-National Fiber Optic Cabling Services-National Data Cabling Services

ATEK provides design- build, installation , and certifications of copper, coax, wireless, optical or point to point laser communications (space optics), structured cabling and fiber optic cabling systems in central offices, POP sites, commercial, and residential sites. We also offer builders and developers a system to build ongoing revenue by installing "Smart Home" cabling into all new homes insuring the homeowner that his new home investment is technologically secure and will not become obsolete for a minimum of 25 years. The Smart Home certified cables we install are made of CAT 5e or CAT 6,CAT 6A and (CAT 7) coax Cable, and multimode fiber optic cable. All installations are covered by a five year warranty minimum and qualifying systems are covered for up to 25 years. Cable certification testing is performed using state-of-the-art test equipment.

ATEK Will Work With You And Your Budget To Deliver The Most Cost Effective Services- From National Fiber Optic Deployments & National Chain Network Rollouts To Small Local Projects Entailing Single Small Cable Runs-We will quote you no matter how big nor small your requirements may be.

ATEK provides design- build, installation , project management and certifications of copper, coax, wireless, optical or point to point laser communications (space optics), structured cabling and fiber optic cabling systems in central offices, POP sites, commercial, and residential sites. We also offer builders and developers a system to build ongoing revenue by installing FTTH design- Engineering and "Smart Home" cabling into all new homes insuring the homeowner that his new home investment is technologically secure and will not become obsolete for a minimum of 25 years. The Smart Home certified cables we install are made of CAT 5e or CAT 6, coax Cable, and multimode fiber optic cable. All installations are covered by a five year warranty minimum and qualifying systems are covered for up to 25 years. Cable certification testing is performed using state-of-the-art test equipment.

We offer a complete array of wireless-WIFI Product Solutions-we will design-build your wireless network ATEK Communications is a valuable Business Partner for anyone who's uses Voice or Data Services in their daily operations. ATEK has a separate wireless division to design- build-install and certify custom wireless, WIFI- wireless backhaul optical or point to point laser network.If you are a city, town, resort, or any governmental entity- call us and our engineers will assist you in designing a network that will provide you the proper speed, bandwidth and capability on- time and within budget.

Search our site

ATEK Communications

cisco systems

cisco systems

Leviton

cisco systems Anritsu