• Versatile cassettes High density Front access Rear access Under floor
  Innovative wire management
  Retro-fit of existing panels LC, MT-RJ, MU, SC duplex Custom silk screening
• 19, 23, or 24 inch mounting

Corning (compatible) Wall Mount Enclosures

Corning (compatible) Wall Mount Fiber Optic Enclosures Fiber-Conn's wall-mount patch enclosures are designed for direct termination of up to 96 fibers. The WAC series wall mount fiber optic enclosures accommodate up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

Features and Benefits

• Three sizes available with up to 8 adapter panel capacity 16-gauge steel with corrosion-resistant black powder finish coat Swing-down door with cable strand for more work space Grommets at the top and bottom Strain-relief hardware and routing guides help maintain minimum bend radius. Available unloaded or fully loaded with capability of mechanical termination
• Zip ties and installation screws included

Part No. WAC-1X-Price $71.39 each
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment. *The WAC-1X does not support splice trays.
Lead time: In Stock, Immediate Shipment

Part No. WAC-2X-Price $79.64 each
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-4X- Price $95.79 each
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment Part No. WAC-8X- Price $199.25 each
Dimensions: Width = 17'', 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-12X
Dimensions: Width=17.75", Depth = 5.87'', Height = 16.75"
Features: Wall-mount enclosure accepts 12 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock.
Lead time: In Stock, Immediate Shipment

Rack Mount Enclosures

		Fiber Optic Patch Panels-Rack Mount (RAC Series) Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module preassemblies are available for easy fiber installation and management. Applications Premise data network cabling and installations Central office locations for Telco applications Head-end location for CATV applications Termination of interconnect cables at entry or intermediate cross connects Termination of horizontal cables, cross connection or backbone cables to jumper cables Splice capability with splice trays loaded. Features and Benefits Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included Competitive pricing and prompt delivery *Note: Clear front door is not available

ATD 19” Rack Mount Fiber Optic Enclosure

 Features and Benefits

• Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included
• Competitive pricing and prompt delivery

Part No. ATDRAC-12-OP ATD19" 12 Port Rack Mount Enclosure, Holds 2 ( 6 Packs ) Price $ 56.00

Part No. ATDRAC-24-OP ATEK Communications24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 75.00

New is a ATD-RS24 and ATEK CommunicationsF1-RS72 rack mount splice and termination enclosure. Allows for patching on top and convenient organization of splice trays in the bottom shelf. Both 24 and 72 patch and splice versions are available. Call ATEK Communicationsat (866) 342-3721 to order in black 16 gauge steel. .

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATEK Communicationsat (866) 342-3721 to order in black 16 gauge steel.

Part No. ATDRS-24 ATEK Communications19" 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ) Price $ 189.00 each

Part No. ATDRS ATEK Communications72 Port Rack Patch & Splice Enclosure ) Price $ 270.00 each

The ATEK CommunicationsRack Mount Enclosure is designed for low or high density patching applications. This sturdy 16 gauge aluminum rack enclosure is available in 24, 48, 72, 96 and 144 port versions in standard beige. This unit provides a lift-off door with front and back access to the slideout tray. The ATD Rack Mount Enclosure features a smoked Lexan front door. Call ATD at 1-866-342-3721 to order in black 16 gauge steel.

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATEK Communicationsat (866) 342-3721 to order in black 16 gauge steel.ATD-F1RM144X - 144 Port Rack Mount Enclosure, unloaded, holds 24 six packs, 13 1/2"D x 17 1/8"W x 15"H, 19lbs.  
  ATD-F1RM24XA - 24 Port Rack Mount Enclosure, unloaded, holds 4 six packs, 13 1/4"D x 17 1/8"W x 3 1/2"H, 12lbs.
  ATD-F1RM48X - 48 Port Rack Mount Enclosure, unloaded, holds 6 eight packs, 13 1/4"D x 17 1/8"W x 4 3/4"H, 14lbs.
• ATD-F1RM72X - 72 Port Rack Mount Enclosure, unloaded, holds 12 six packs, 13 1/4"D x 17 1/8"W 7 1/8"H, 17lbs.

Part No. ATD-F1RM144X- ATEK Communications144 Port Rack Mount Enclosure, Holds 24 ( 6 Packs ) Price $ 245.00 each

Part No. ATD-F1RM24XA -ATEK Communications24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 99.00 each Part No. ATD-F1RM48X- ATEK Communications48 Port Rack Mount Enclosure, Holds 6 ( 8 Packs ) Price $ 112.00 each

Part No.ATD-F1RM72X ATDATD 72 Port Rack Mount Enclosure, Holds 12 ( 6 Packs ) Price $170.00 each

FIS24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs )

24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATDRAC-12X-Price $96.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATDRAC-24X- Price $100.50
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATEK CommunicationsRAC-2X- Price $105.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $173.25
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5 lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
Lead time: In Stock, Immediate Shipment